Description of Thermal Testing Chamber
LIB INDUSTRY offers a range of prefabricated, tight-tolerance environmental walk-in rooms that are easy to ship and install.
Walk in thermal testing chamber major features include:
Forced air circulation systems distribute air evenly and constantly recirculate it, maintaining uniform and accurate temperatures and humidity.
Technical Specification of Thermal Testing Chamber
| Name | Laboratory 85℃ Walk In Thermal Testing Chamber |
| Model | Walk-Ins |
| Internal dimension (mm) | Custom Made |
| Overall dimension (mm) | Custom Made |
| Temperature range | -70℃ ~ +150℃ |
| Humidity range | 10% ~ 95% RH |
| Temperature fluctuations | ± 2.0℃ |
| Humidity fluctuations | ± 5.0% RH |
| Heating rate | 1℃ / min |
| Cooling rate | 1 ℃ / min |
| Controller | Programmable color LCD touch screen controller PC Link, Ethernet port |
| Cooling system | Mechanical compression refrigeration system |
| Thermal insulation | Polyurethane foam |
| Noise | Less than 85 dBA |
| Power Supply | 400V 50HZ |
| Environmental conditional | 5℃～+40 ℃ ≤85% RH |
Details of the Advantage
|
| Workroom | Air Circulation |
|
| Safe Lock | Programmable Controller |
Temperature Ranges are from -60°C to +120°C
WalkIn cooling chambers,refrigeration system meets the room's load demand and operates continuously in cooling mode. Single-stage mechanical units operate at -35°C and above and two-stage cascade units at below -35°C.
Thermotron testing chamber,Electric heating system provides very accurate and straight line control of temperatures. System is reliable and has a long life.
Features of Thermal Testing Chamber
1.Environmental simulation test chamber,Single door or double door, or according to customer’s requirement
2.Silicon rubber is used for high sealing effect, high / low temperature resistance, anti-aging, and good Sealed performance.
3.Lighting Device:moisture-proof & explosion-proof, can be directly manual switch controlled from the outside.
4.Height distance to the floor is 200mm; chamber base board is slightly slant with drain hole for letting out the condensed water.
5.Interior chamber floor contains many stiffeners, to enable the floor load capacity ≥500Kg / m2, wheel impact ability≥1MT;
6. Movable entry ramp is provided.
Related Products
Send an inquiry or a free solution!
Product Tags:
|
|
Laboratory 85℃ Walk In Thermal Testing Chamber Thermal Vacuum Chambers Images
|
